Home › Error codes › GE oven › F2
GE Range / Oven Error Code F2
Oven temperature too high. F2 or F20 means the oven temperature went above a preset limit. GE says a trained technician should diagnose fault codes.
- Code: F2 (also shown as F20)
- Appliance: GE range / oven
- Owner fix: Usually needs a technician. Do the safe checks on this page, then book service if the code returns.
- Repair cost: call for a quote
- Checked against the manufacturer sources below on October 27, 2026
Before you reset: GE recommends keeping the range or wall oven off at the circuit breaker until it is serviced. You can switch the breaker on long enough to use the cooktop, then off again.
Likely causes
- Oven temperature sensor fault
- Stuck relay on the control
- Control board fault
Safe checks you can do
Safety: Do not remove panels or work on wiring. A breaker reset is the only power step an owner should do. On a gas range, if you smell gas, do not switch anything on or off; leave and call your gas company from outside.
- Turn off the oven. Switch off the range's circuit breaker for a minute or two, then restore power.
- If the code returns, leave the breaker off and schedule service.
- Do not use the oven if it overheats.
When to call a pro
- The code comes back after the breaker reset
- The oven runs hot or will not shut off
- Any time you smell burning or gas, see sparks, or would need to open a panel
What does it cost to fix?
Call for a quote. Repair costs depend on the brand, the model, the part and the shop, so this site does not publish price ranges. Ask each shop for its diagnostic or trip fee and a written quote after diagnosis. See what affects repair cost.
Sources
Codes and steps vary by model. Your owner's manual and the model sticker inside the door or on the back are the final word for your exact unit.
Other GE oven codes
Range / Oven codes from other brands
See also: Range / Oven help in Idaho · Oven not heating · All error codes
FAQ
What does GE error code F2 mean?
Oven temperature too high. F2 or F20 means the oven temperature went above a preset limit. GE says a trained technician should diagnose fault codes.
Can I fix GE code F2 myself?
Usually needs a technician. Do the safe checks on this page, then book service if the code returns. Do not remove panels or work on wiring. A breaker reset is the only power step an owner should do. On a gas range, if you smell gas, do not switch anything on or off; leave and call your gas company from outside.
How much does it cost to fix GE code F2?
Call for a quote. Repair costs depend on the brand, the model, the part and the shop, so this site does not publish price ranges. Ask each shop for its diagnostic or trip fee and a written quote after diagnosis.
Last updated: