Home › Error codes › Whirlpool washer › F9 E1

Whirlpool Washer Error Code F9 E1

Long drain time. F9 E1 means draining is taking longer than expected, typically over eight minutes.

Likely causes

• Kinked or clogged drain hose
• Drain hose pushed too far into the standpipe or taped in
• Clogged pump filter on models that have one
• Excess suds from non-HE detergent
• Standpipe height outside 39 to 96 inches

Safe checks you can do

Safety: Unplug the washer before touching the pump filter, hoses or drum. Water left inside can be hot and heavy, so put towels down first.

1. Straighten or clear the drain hose and use the U-shaped hose form.
2. Keep the hose end no more than about 4.5 inches into the standpipe and do not tape it in.
3. Use HE detergent only.
4. Clean the drain pump filter if your model has one (unplug first, towels down).

When to call a pro

• The hose and standpipe are clear and it still drains slowly
• You hear the pump hum without draining
• Any time you smell burning or gas, see sparks, or would need to open a panel

What does it cost to fix?

Call for a quote. Repair costs depend on the brand, the model, the part and the shop, so this site does not publish price ranges. Ask each shop for its diagnostic or trip fee and a written quote after diagnosis. See what affects repair cost.

Sources

• Whirlpool: Error codes in front load washers
• Whirlpool: F9 E1 front load washer

Codes and steps vary by model. Your owner's manual and the model sticker inside the door or on the back are the final word for your exact unit.

Other Whirlpool washer codes

Washer codes from other brands

See also: Washer help in Idaho · Washer not draining · Washer won't spin · Washer leaking water · All error codes

FAQ

Last updated: October 29, 2026