Home › Error codes › Samsung washer › LE
Samsung Washer Error Code LE
Water level or leak error. LE, LC, 1E or 1C means moisture was detected where it should not be, or the water level sensor has a problem. Samsung says to look for a leak first and to rule out excess suds.
- Code: LE (also shown as LC, 1E, 1C, LC1)
- Appliance: Samsung washer
- Owner fix: Often fixable with the safe checks on this page. Call a pro if the code comes back.
- Repair cost: call for a quote
- Checked against the manufacturer sources below on October 27, 2026
Likely causes
- A small leak from a hose, the door boot or the pump
- Kinked supply or drain hoses
- Too much detergent or non-HE detergent creating suds
- Water level sensor problem
Safe checks you can do
Safety: Unplug the washer before touching the pump filter, hoses or drum. Water left inside can be hot and heavy, so put towels down first.
- Look under and around the washer for water and check hose connections.
- Make sure supply and drain hoses are not kinked. Do not remove the screw that holds the drain hose holder on the back.
- Run an empty cycle with no detergent. If suds appear, keep running empty cycles until they stop.
When to call a pro
- You find a leak from inside the washer
- No suds, no visible leak, and the code continues
- Any time you smell burning or gas, see sparks, or would need to open a panel
What does it cost to fix?
Call for a quote. Repair costs depend on the brand, the model, the part and the shop, so this site does not publish price ranges. Ask each shop for its diagnostic or trip fee and a written quote after diagnosis. See what affects repair cost.
Sources
Codes and steps vary by model. Your owner's manual and the model sticker inside the door or on the back are the final word for your exact unit.
Other Samsung washer codes
Washer codes from other brands
See also: Washer help in Idaho · Washer not draining · Washer won't spin · Washer leaking water · All error codes
FAQ
What does Samsung error code LE mean?
Water level or leak error. LE, LC, 1E or 1C means moisture was detected where it should not be, or the water level sensor has a problem. Samsung says to look for a leak first and to rule out excess suds.
Can I fix Samsung code LE myself?
Often fixable with the safe checks on this page. Call a pro if the code comes back. Unplug the washer before touching the pump filter, hoses or drum. Water left inside can be hot and heavy, so put towels down first.
How much does it cost to fix Samsung code LE?
Call for a quote. Repair costs depend on the brand, the model, the part and the shop, so this site does not publish price ranges. Ask each shop for its diagnostic or trip fee and a written quote after diagnosis.
Last updated: