Home › Error codes › LG washer › IE
LG Washer Error Code IE
Water inlet error. IE (E02 or E10 on some models) means the tub did not fill to the right level in time. The water may be off, the hose kinked or frozen, or the inlet filter clogged.
- Code: IE (also shown as E02, E10)
- Appliance: LG washer
- Owner fix: Often fixable with the safe checks on this page. Call a pro if the code comes back.
- Repair cost: call for a quote
- Checked against the manufacturer sources below on October 27, 2026
Likely causes
- Water faucet closed or hose not connected
- Kinked supply hose
- Frozen faucet or supply hose in cold weather
- Clogged inlet filter screen
- Low water pressure (LG specifies 14.5 to 116 psi)
- Faulty water inlet valve
Safe checks you can do
Safety: Unplug the washer before touching the pump filter, hoses or drum. Water left inside can be hot and heavy, so put towels down first.
- Open both faucets fully and make sure the hoses are connected.
- Straighten any bent supply hose.
- With the faucets off, disconnect the hose at the washer and clean the inlet filter.
- In winter, check for frozen hoses. LG suggests a hot wet towel around the faucet for 5 minutes and warm (not boiling) water on the hose.
When to call a pro
- Water flows from the faucet but the washer still will not fill
- You suspect a failed inlet valve
- Any time you smell burning or gas, see sparks, or would need to open a panel
What does it cost to fix?
Call for a quote. Repair costs depend on the brand, the model, the part and the shop, so this site does not publish price ranges. Ask each shop for its diagnostic or trip fee and a written quote after diagnosis. See what affects repair cost.
Sources
Codes and steps vary by model. Your owner's manual and the model sticker inside the door or on the back are the final word for your exact unit.
Other LG washer codes
Washer codes from other brands
See also: Washer help in Idaho · Washer not draining · Washer won't spin · Washer leaking water · All error codes
FAQ
What does LG error code IE mean?
Water inlet error. IE (E02 or E10 on some models) means the tub did not fill to the right level in time. The water may be off, the hose kinked or frozen, or the inlet filter clogged.
Can I fix LG code IE myself?
Often fixable with the safe checks on this page. Call a pro if the code comes back. Unplug the washer before touching the pump filter, hoses or drum. Water left inside can be hot and heavy, so put towels down first.
How much does it cost to fix LG code IE?
Call for a quote. Repair costs depend on the brand, the model, the part and the shop, so this site does not publish price ranges. Ask each shop for its diagnostic or trip fee and a written quote after diagnosis.
Last updated: